Laser Cutting Machine 1500KW

About Laser Cutting Machine 1500KW

Why use fiber metal cutting equipment

(1) Fiber laser cutting machine for metal precise cutting powered by fiber laser technology. The quality fiber laser beam results in faster cutting speeds and higher quality cuts compared to other cutting solutions. The key advantage of a fiber laser is its short beam wavelength (1,064nm). The wavelength, which is ten times lower than that of C02 laser, generates high absorption into metals. This makes the fiber laser become a perfect tool for cutting metal sheets of stainless steel, carbon steel, mild steel, aluminum, brass, etc.

(2) The efficiency of a fiber laser far exceeds traditional YAG or CO2 laser. The fiber laser beam is capable of cutting reflective metals with much less energy as the laser is absorbed into the metal being cut. The unit will consume little to no energy when not active.

(3) Another advantage of fiber laser is the use of highly reliable single emitter diodes with projected lifetimes greater than 100,000 hours of continuous or pulsed operation.

(4) Laser software allows for the capability to control power, modulation rate, pulse width and pulse shape giving the user full control of the lasers capabilities.

Characteristics of 1000w fiber metal cutting equipment

1.Great Performance

Identical cutting quality on any cutting point is realized through fiber transmission.

2.High Efficiency

The rapid cutting speed is two times higher than that of CO2 laser machine.Its use-cost is low.

3.Low Consumption of Gas

Laser cutting does not make any gas because of the specific cutting technology on steel plate.

4.Low Consumption of Energy

It is environment-protecting and energy-saving.Its power consumption is reduced by 20%-30% compared with that of CO2 laser machine.

5.Maintenance-free

Reflecting lens is not needed for fiber transmission.Much time is saved when optical path is adjusted.It is maintenance-free.